Search results for "Heat of combustion"
showing 10 items of 12 documents
THE POSSIBILITY OF DISPOSING OF SPENT COFFEE GROUND WITH ENERGY RECYCLING
2015
The current policy of waste management requires, above all, a gradual reduction of waste amount and, to a larger extent, forces us to seek new methods of waste disposal. Recycling the energy contained in biomass waste is a more and more universally applied method of thermal converting. Biomass combustion allows saving fossil fuels which fits into sustainable development. This paper checks the possibility of using spent coffee ground (SCG) in energy recycling using a combustion process. This particular biomass type up to now has not been widely examined, which inclines to consider its usage as a potential additive to alternative fuels. In the study, we examined the quality of fuel, which was…
Influence of Elevated Pressure on the Torrefaction of Wood
2016
The use of pressurized reactors in industrial processes can improve efficiency and economics. Torrefaction is a partial pyrolysis of lignocellulosic biomass designed to result in a solid product with improved fuel properties for utilization in combustion and gasification. In this work, the influence of elevated pressure on the torrefaction of wood has been investigated. Wood samples were torrefied using a pressurized thermogravimetric reactor (PTGR) with pressures of 0.1 to 2.1 MPa. The results indicate that reactor pressure, particle size of feedstock, and wood species are all factors in torrefaction yield improvements. Torrefaction at 2.1 MPa pressure improved the higher heating value (ca…
Upgrade of citrus waste as a biofuel via slow pyrolysis
2015
Abstract Slow pyrolysis (200–650 °C) experiments on citrus residues (orange peel waste “OP” and lemon peel waste “LP”) were carried out in lab scale fixed bed batch reactor. Bio-oil and bio-char obtained by thermal degradation are more stable, more homogeneous and higher energy content fuels when compared to the parent feedstock. Thermogravimetric analysis (TGA) showed higher stability of LP waste, which appears related to the higher lignin content . Mass and energy yields of solid and liquid products (i.e., char and oil) were measured to determine the effects of peak temperature on feedstock. A linear correlation between Gross Calorific Value (GCV), peak temperatures and mass loss (ML) all…
Semi-continuous feeding and gasification of alfalfa and wheat straw pellets in a lab-scale fluidized bed reactor
2015
Abstract Small scale air-blown fluidized bed gasification of alfalfa and wheat straw pellets were conducted for semi-continuous solid feeding and range of operating conditions varied due to the modifications in equivalence ratio (ER) (0.20–0.35) achieved both by varying solid and air input. Alfalfa pellets displayed an improvement in several gasification variables such as gas lower heating value (∼4.1 MJ/Nm3), specific gas yield (1.66 Nm3/kg), cold gas efficiency (∼42%) and carbon conversion efficiency (∼72%) as ER maximized to 0.35 which was found optimum for this feedstock for the present course of experiments. Gasification parameters of wheat straw pellets on the other hand were characte…
Numerical and Experimental Investigation of Equivalence Ratio (ER) and Feedstock Particle Size on Birchwood Gasification
2017
This paper discusses the characteristics of Birchwood gasification using the simulated results of a Computational Fluid Dynamics (CFD) model. The CFD model is developed and validated with the experimental results obtained with the fixed bed downdraft gasifier available at the University of Agder (UIA), Norway. In this work, several parameters are examined and given importance, such as producer gas yield, syngas composition, lower heating value (LHV), and cold gas efficiency (CGE) of the syngas. The behavior of the parameters mentioned above is examined by varying the biomass particle size. The diameters of the two biomass particles are 11.5 mm and 9.18 mm. All the parameters investigate wit…
Assessment of the Energy Potential of Chicken Manure in Poland
2019
Animal waste, including chicken manure, is a category of biomass considered for application in the energy industry. Poland is leading poultry producer in Europe, with a chicken population assessed at over 176 million animals. This paper aims to determine the theoretical and technical energy potential of chicken manure in Poland. The volume of chicken manure was assessed as 4.49 million tons per year considering three particular poultry rearing systems. The physicochemical properties of examined manure specimens indicate considerable conformity with the data reported in the literature. The results of proximate and ultimate analyses confirm a considerable effect of the rearing system on the e…
Experimental study of the pyrolysis of waste bitumen for oil production
2020
Abstract This work focuses on bitumen slow pyrolysis. Mass and energy yields of oil, solid and gas were obtained from pyrolysis experiments using a semi-batch reactor in a nitrogen atmosphere, under three non-isothermal conditions (maximum temperature: 450 °C, 500 °C and 550 °C). The effect of temperature on the product yields was discussed. The gas compositions were analysed using gas chromatography (GC) and the heating value of oil and solid residue was also measured. Using a thermo-gravimetric analyser, kinetic parameters were evaluated through Ozawa-Flynn-Wall (OFW) method. Results showed that oil yield is maximum at 500 °C (50%). Moreover, gas yield increased with increasing pyrolysis …
A comparative economic analysis of torrefied pellet production based on state-of-the-art pellets
2017
Abstract Torrefied pellets have fuel properties superior to those of conventional wood pellets and potentially allow greater rates of co-firing and thus larger reductions in net CO 2 emissions. Despite the growing amount of scientific output on torrefaction, the economic feasibility of torrefied pellet production is still a topic of considerable uncertainty. This is an obstacle for decision makers looking to implement sustainable energy policies. This paper compares the economics of torrefied pellets to conventional wood pellets. Working backwards from demonstrated pellet properties, this work attempts to answer the following question: Based on state-of-the-art torrefied pellets, what would…
Characterization and pilot scale fluidized bed gasification of herbaceous biomass: A case study on alfalfa pellets
2015
Abstract Pilot-scale bubbling fluidized bed gasification tests of alfalfa pellets were performed at two different operational periods ranged on the basis of the two given equivalence ratio (ER) (the ratio between actual air and the stoichiometric air) namely as 0.25 and 0.30. During the test, the solid feeding rate was kept constant at 4.7 kg/h while the air input was varied and thus the ER. Increasing air from 4.16 to 4.99 N m3/h contributed to the evolution pattern of several parameters such as the rise in gas lower heating value (LHV) and gas yield, the average maximum of which were 4.2 MJ/N m3 and 1.5 N m3/kg respectively. Gas composition was mainly boosted by the concentration of CO, a…
Characterization of Biodiesel from Vegetable Oil Using Comprehensive Two-Dimensional Gas Chromatography
2012
Biodiesel from vegetable oils has been analyzed and its suitability for internal combustion engines has been assessed. The Standard biofuel’s characteristics have been investigated. Gas chromatography (GC) tests were carried out to characterize the fatty acid behavior. It was found that the mass percentage of saturated fatty acids did not change substantially with time, while unsaturated fatty acids increased with time for both B100 and B30. An increase in density for B100 and B30 with time was noted. Biodiesel density was within the standardization. The calorific values of biodiesel and its blend increased with time. Higher heating value for B100 increased from 41 to 43 MJ/kg while B30 inc…